page 1 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 smd super fast rectifiers 1 2 2 2 2 3 4 4 4 5 6 6 7 list list................................................................................................. package outline............................................................................... features.......................................................................................... maximum ratings ............................................................................. rating and characteristic curves........................................................ pinning information........................................................................... marking........................................................................................... suggested solder pad layout............................................................. packing information.......................................................................... reel packing.................................................................................... suggested thermal profiles for soldering processes............................. high reliability test capabilities........................................................... mechanical data............................................................................... sgfm101c-d2 thru sgfm108c-d2 document id issued date revised date revision page. ds-121424 2009/02/10 2014/11/05 f 7
package outline page 2 formosa ms 10.0a surface mount super fast rectifiers-50-600v parameter conditions forward rectified current forward surge current reverse current diode junction capacitance see fig.1 8.3ms single half sine-wave (jedec methode) f=1mhz and applied 4v dc reverse voltage symbol min. typ. max. unit i o i fsm i r c j a a a pf 10.0 150 5.0 v = v t = 25 c r rrm j o v = v t = 125 c r rrm j o 80 50 sgfm101c-d2 50 100 35 70 symbols v rrm (v) v rms v r (v) (v) *1 *2 *3 *1 repetitive peak reverse voltage *2 rms voltage *3 continuous reverse voltage *4 maximum forward voltage@i =5.0a *5 reverse recovery time f maximum , note 1 v f (v) *4 400 280 1.25 -55 to +150 600 420 35 50 100 400 600 0.95 1.70 200 140 200 storage temperature t stg o c +175 -65 (c) o operating temperature t, j http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. high current capability. high surge current capability. glass passivated chip junction. features ? super fast reovery time for switching mode application. lead-free parts meet enironmental standards of mil-std-19500/228 ? suffix "-h" indicates halogen free parts, ex. sgfm101c-d2-h. ? ? ? ? ? sgfm102c-d2 SGFM104C-D2 sgfm106c-d2 sgfm108c-d2 dimensions in inches and (millimeters) d2pak 0.402(10.20) 0.386(9.80) 0.192(4.8) 0.176(4.4) 0.370(9.40) 0.354(9.00) 0.205(5.20) 0.189(4.80) 0.063(1.60) 0.055(1.40) 0.024(0.60) 0.016(0.40) 0.055(1.40) 0.047(1.20) 0.185(4.70) 0.169(4.30) 0.012(0.30) 0.004(0.10) 0.108(2.70) 0.092(2.30) 0.046(1.20) 0.032(0.80) mechanical data epoxy:ul94-v0 rated flame retardant case : molded plastic, terminals : solder plated, solderable per mil-std-750, method 2026 mounting position : any weight : 1.46 gram ? ? ? ? ? to-263 / d2pak approximated document id issued date revised date revision page. note 1. reverse recovery time test condition, i =0.5a, i =1.0a, i =0.25a frrr t rr (ns) *5 sgfm101c-d2 thru sgfm108c-d2 maximum ratings and electrical characteristics (at t =25 a o c unless otherwise noted) smd super fast rectifiers ds-121424 2009/02/10 2014/11/05 f 7
page 3 rating and characteristic curves (sgfm101c-d2 thru sgfm108c-d2) http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 fig.1 - forward current derating curve average forward current amperes 0 25 50 75 100 125 150 fig. 2 - maximum non-repetitive peak forward surge current 12 10 8 6 4 2 fig. 3 - typical instantaneour forward characteristics 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 instantaneous forward voltage, volts instantaneous forward current, amperes 0.01 0.1 1.0 10 100 tj=25 c o pulse width=300us 1% duty cycle instantaneous reverse current, amperes u fig. 4 - typical instantaneous reverse characteristics fig. 5 - typical junction capacitance fig. 6 - test circuit diagram and reverse recovery time characteristic sgfm101c-d2 , sgfm102c-d2 SGFM104C-D2 sgfm106c-d2 sgfm108c-d2 0 20 40 60 80 100 120 140 100 10 1 0.1 0.01 t =25c j t =100c j t =125c j document id issued date revised date revision page. 30 0 60 90 120 150 110 5 50 t =25 c j 8.3ms single half sine wave jedec method peak for ward surge current ,(a) reverse voltage,(v) junction cap acitance,(pf) 140 120 100 80 60 40 20 0 .01 .05 .1 .5 1 5 10 50 100 case temperature,( c) number of cycles at 60hz percent of rated peak reverse voltage,(%) (+) (+) 25vdc (approx.) ( ) ( ) pulse generator (note 2) oscilliscope (note 1) 1 non- inductive notes: 1. rise time= 7ns max., input impedance= 1 megohm.22pf. 2. rise time= 10ns max., source impedance= 50 ohms. d.u.t. 10 noninductive 50 noninductive +0.5a 0 -0.25a -1.0a | | | | | | | | 1cm set time base for 50 / 10ns / cm trr ds-121424 2009/02/10 2014/11/05 f 7
page 4 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 marking type number marking code sgfm101c-d2 sf101c sgfm102c-d2 sf102c SGFM104C-D2 sf104c sgfm106c-d2 sf106c sgfm108c-d2 sf108c suggested solder pad layout l x1 x2 y1 c e y2 pinning information simplified outline symbol 1 3 2 1 2 3 document id issued date revised date revision page. sgfm101c-d2 thru sgfm108c-d2 dimensions in inches and (millimeters) c 0.098(2.50) package d2pak e l x1 x2 y1 y2 0.665(16.90) 0.425(10.80) 0.071(1.80) 0.449(11.40) 0.138(3.50) 0.374(9.50) smd super fast rectifiers ds-121424 2009/02/10 2014/11/05 f 7
page 5 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 item tolerance d2pak carrier width carrier length carrier depth sprocket hole 13" reel outside diameter 7" reel outside diameter 13" reel inner diameter 7" reel inner diameter feed hole diameter sprocket hole position punch hole position punch hole pitch sprocket hole pitch embossment center reel width overall tape thickness tape width p 0 p 1 e b c d f t w p a d d d 1 d 1 d 2 w 1 symbol 0.1 0.1 0.1 min min 0.5 0.1 0.3 1.0 0.1 0.1 0.1 0.1 0.1 0.1 2.0 2.0 unit:mm 1.50 330.00 - 50.00 - 13.00 1.75 11.50 16.00 4.00 2.00 0.23 24.00 30.00 note:devices are packed in accor dance with eia standar rs-481-a and specifications listed above. 10.70 16.30 5.10 document id issued date revised date revision page. sgfm101c-d2 thru sgfm108c-d2 packing information p 0 p 1 e b d f w p a d d 1 d 2 w 1 c t smd super fast rectifiers ds-121424 2009/02/10 2014/11/05 f 7
page 6 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. reel packing d2pak/to-263 800 16.0 800 337*337*37 330 350*330*360 6,400 15.0 package reel size reel component spacing box inner box reel dia, carton size carton approx. gross weight (kg) (pcs) (m/m) (m/m) (m/m) (pcs) (m/m) (pcs) 13" profile feature soldering condition average ramp-up rate(t to t ) <3 /sec preheat -temperature min(tsmin) 150 -temperature max(tsmax) 200 -time(min to max)(t ) 60~120sec tsmax to t -ramp-uprate <3 /sec time maintained above: -temperature(t ) 217 -time(t ) 60~260sec peak temperature(t ) 255 0/ 5 time within 5 of actual peak temperature(t ) ramp-down rate <3 /sec time 25 to peak temperature <6minutes lp s l l l p p o o o o o oo o o o c c c c c c- + c c c c 3.reflow soldering 10~30sec 1.storage environment: temperature=5 ~40 humidity=55% 25% 2.reflow soldering of surface-mount devices oo cc suggested thermal profiles for soldering processes critical zone tl to tp critical zone tl to tp tl tsmax tsmin ramp-up tp ts preheat t25 c to peak o time 25 tl tp ramp-down temperature sgfm101c-d2 thru sgfm108c-d2 smd super fast rectifiers ds-121424 2009/02/10 2014/11/05 f 7
page 7 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. sgfm101c-d2 thru sgfm108c-d2 smd super fast rectifiers 1. solder resistance 2. solderability 3. high temperature reverse bias 4. forward operation life 5. intermittent operation life 6. pressure cooker 7. temperature cycling 8. forward surge 9. humidity 10. high temperature storage life at 260 5 for 10 2sec. immerse body into solder 1/16" 1/32" at 245 5 for 5 sec. v =80% rate at t =150 for 168 hrs. rated average rectifier current at t =25 for 500hrs. t = 25 c, i = i on state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. 15p at t =121 for 4 hrs. -55 to +125 dwelled for 30 min. and transferred for 5min. total 10 cycles. 8.3ms single half sine-wave , one surge. at t =85 , rh=85% for 1000hrs. at 175 for 1000 hrs. c c c c c cc c c o o o o o oo o o rj a afo sig a a o mil-std-750d method-2031 mil-std-202f method-208 mil-std-750d method-1038 mil-std-750d method-1027 mil-std-750d method-1036 mil-std-750d method-1051 mil-std-750d method-4066-2 mil-std-750d method-1021 mil-std-750d method-1031 jesd22-a102 item test conditions reference high reliability test capabilities ds-121424 2009/02/10 2014/11/05 f 7
|
